GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 3 - System setup 3 - 45
3-8-7 Save the New Settings
1.) Press Save Settings to save the new settings.
.
A Warning is displayed on the screen, see illustration below.
2.) Select OK to save the new settings. (By selecting Cancel, the previous settings will be kept.)
3.) The new settings are saved to a common settings file. After a restart, the settings are also included
in other screens.
4.) Restart VIVID E9 / VIVID E7 to activate the changes.
Figure 3-31 Save New TCP/IP settings
Figure 3-32 Warning
To Next Page
Loading...
