GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
3 - 48 Section 3-8 - Connectivity setup
3-8-8-4 To create a new dataflow
1.) Select Add to start the creation of a new dataflow. This will bring up the Enter new name dialog.
2.) Enter the name for the new dataflow.
Example: DR PACS Worklist
3.) Select Ok.
Figure 3-34 Enter new name dialog
Figure 3-35 Enter the name of the new dataflow