GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 3 - System setup 3 - 47
3-8-8-2 Prerequisite
• Software v112.1.3 and later: None.
3-8-8-3 Preparations - Log on as ADM (software v112.1.3 and later)
1.) Select Config (F2).
2.) Log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
3.) Select Connectivity > Dataflow to display the Dataflow screen (see Figure 3-33.)
Figure 3-33 Dataflow screen with extra buttons
RENAME
ADD
REMOVE