GE Vivid E7 - Page 164

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
4 - 28 Section 4-2 - General procedures
4-2-7-15 Admin — Restore
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
2.) Select Admin > Restore.
3.) Record Remote Path.
4-2-7-16 Admin — Users
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
2.) Select Admin > Users.
3.) Select and record all data for each user in the User List.
Figure 4-27 Users