GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 4 - General procedures and Functional checks 4 - 27
4-2-7-13 Admin — Disk Management
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
2.) Select Admin > Disk Management.
3.) Record the selected Reminder Interval Every setting.
4-2-7-14 Admin — Backup
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
2.) Select Admin > Backup.
3.) Record Remote Path.
Figure 4-26 Disk Management