GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
4 - 26 Section 4-2 - General procedures
4-2-7-9 About — System Version
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
2.) Select About > System Version.
3.) Record software and hardware versions in Table 4-2 "Record Software versions" on page 4-26.
4-2-7-10 About — Firmware Version
There are no data on this screen that need to be recorded.
4-2-7-11 About — HW Version
There are no data on this screen that need to be recorded.
4-2-7-12 About — Probes
There are no data on this screen that need to be recorded.
Figure 4-25 Information available on the About tab
Table 4-2 Record Software versions
DESCRIPTION RECORD VERSIONS
APPLICATION SW VERSION
SYSTEM SW VERSION
To Next Page
Loading...
Need help?
General
