GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
4 - 30 Section 4-2 - General procedures
4-2-7-18 Service screen
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
2.) Select Service.
.
3.) Record Video settings Format in Table 4-4 "Service screen settings" on page 4-30.
4.) Record Monitor in Table 4-4 "Service screen settings" on page 4-30.
Figure 4-29 Service Settings
Table 4-4 Service screen settings
PARAMETER VALUE
VIDEO-SETTINGS FORMAT
___PAL ___NTSC
MONITOR