GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 43
8-5-11-2 Cable Hook removal
Follow these steps to remove the Cable Hook:
1.) Locate the Cable Hook(s).
2.) Place the Rear Cover face down on a protected, flat surface.
3.) Remove the screw securing the Cable Hook.
4.) Repeat step 2 to remove the other Cable Hook, if necessary.
Figure 8-18 Door I/O Panel
Figure 8-19 Cable Hook screw placement
To Next Page
Loading...
