GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 57
8-5-17-1 Preparations (cont’d)
8-5-17-2 Remove the Bulkhead Cover
Follow these steps to remove the Bulkhead Cover:
1.) Use thumbs to press upper lock tabs toward the front of the VIVID E9 / VIVID E7 to release the top
of the Bulkhead Cover, or, if needed, use a 4 mm flat blade screwdriver to release the 2 lock tabs.
2.) Pull the Bulkhead Cover away from the VIVID E9 / VIVID E7.
Figure 8-33 Bulkhead Cover location
Figure 8-34 Upper tab lock placement on Bulkhead Cover
To Next Page
Loading...
