GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 73
8-6-3-4 Install the LCD Arm assembly
Follow these steps to install the LCD Arm Assembly:
1.) Carefully install the LCD Arm assembly into position, first feeding the LCD Arm cables down through
the console opening.
2.) Push the LCD Mount Lock Handle into locked position.
Figure 8-54 LCD Arm installed onto the UI Frame Upper (Arm for 17” screen illustrated)
Figure 8-55 LCD Mount Lock Handle
DO NOT ADJUST THIS NUT!
LOCKED POSITION
LCD MOUNT LOCK HANDLE
To Next Page
Loading...
