GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 74 Section 8-6 - Top Console Parts Replacement Overview
8-6-3-4 Install the LCD Arm assembly (cont’d)
3.) Connect the LCD cables to the connectors on the Bulkhead.
4.) Install the Bulkhead Cover.
5.) Install the LCD monitor.
8-6-3-5 Calibration and adjustments
See: Section 6-4 "Backlight adjustment" on page 6-5 for LCD Monitor calibration instructions.
Figure 8-56 Bulkhead board connections
POWER/USB PLUG
HDMI PLUG
SCREW
BRACKET, LOCK HDMI, introduced
after the picture was taken.
To Next Page
Loading...
