GE Vivid E7 - Page 436

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 120 Section 8-6 - Top Console Parts Replacement Overview
8-6-18-3 Lower Switch Board with Elastomer installation
1.) Verify that all switch cups are in their correct positions.
2.) Position the Lower Switch Board with Elastomer in its correct position.
3.) Install the 26 fixing screws.
4.) Connect the cable to the Encoder Board.
5.) Install the Trackball.
6.) Install the Operator Panel, Lower.
7.) Install the Operator Panel, Upper.