GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 138 Section 8-6 - Top Console Parts Replacement Overview
8-6-24-2 Wagon AN Drawer Sheet Met. Assembly removal
The Wagon AN Drawer Sheet Met. Assembly is located below the User Interface.
1.) Remove the six screws that fix the Wagon AN Drawer Sheet Met. Assembly to the UI Console (three
screws on each side).
2.) Remove the Wagon AN Drawer Sheet Met. Assembly.
8-6-24-3 Wagon AN Drawer Sheet Met. Assy installation
1.) Position the Wagon AN Drawer Sheet Met. Assy below the UI Console as illustrated in Figure 8-122
"Wagon AN Drawer Sheet Met. Assembly" on page 8-138. Ensure that the wagon is running free,
before you tighten the screws in the next step.
2.) Install the six fixing screws M4 x 8, Torque: 2.5 Nm.
3.) Install the Alphanumeric Keyboard.
4.) Install the Lower OP Panel.
5.) Install the Upper OP Panel.
Figure 8-122 Wagon AN Drawer Sheet Met. Assembly
Figure 8-123 The Wagon AN Drawer Sheet Met. Assy.