GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 251
8-11-4-5 Installing the Graphics Adapter in the BEP6
Follow these steps to install the (new) Graphics Adapter:
1.) Plug in the (new) Graphics Adapter.
2.) Insert and fasten the fixing screw.
3.) Plug in the cables you removed earlier.
- Connections if DVR is installed in the BEP6:
- Connection if the BEP6 is without DVR:
4.) Install the fixing screws you removed earlier.
5.) Install the HDD.
DVI Flex Main Yggdrasil
DVI-Samtech Flex
DVR Audio
To Next Page
Loading...
