Peripherals Installation
Vivid T9/Vivid T8 – Basic Service Manual 3-27
5795591-100 English Rev. 3
3-8-3 Peripherals Installation Instructions
3-8-3-1 Sony UP-D898DC Printer Installation
3-8-3-1-1 Tools
No special tools needed.
3-8-3-1-2 Manpower
One person 5 min.
3-8-3-1-3 Preparations
1. Unpack B/W Printer.
3-8-3-1-4 Installation Procedure
NOTE: The printer driver is customized for the Vivid T9/Vivid T8 at the
factory; you do not need to change the settings.
1. Place the device in a suitable place.
2. Connect the DC cable (a), printer USB cable (b) to the
printer.
3. Connect the DC cable (1), printer USB cable (2) to the cable
hub on the system.
4. Turn on the printer.
Figure 3-5. Connect UP-D898DC to Vivid T9/Vivid T8
To Next Page
Loading...
