GE Vivid T8 - Network Configuration

Connectivity setup
Vivid T9/Vivid T8 – Basic Service Manual 3-65
5795591-100 English Rev. 3
3-9-6-2 Query/Retrieve Verification
1. Follow the steps in 3-9-4-2 ‘Verify the Network Connection
to a Device’ on page 3-50 to verify the TCP/IP connection of
the Query/Retrieve Server.
2. Follow the steps in 3-9-4-2 ‘Verify the Network Connection
to a Device’ on page 3-50 to verify the connection to the
Query/Retrieve Server.
3-9-7 Network Configuration
3-9-7-1 Wire-Lan Network
1. Connect system with network.
2. Select Config > Connectivity > TCP/IP and select
Network Settings.
Figure 3-51. Network Settings
3. Select Ethernet.
Figure 3-52. Network Connection