Functional checks
Vivid T9/Vivid T8 – Basic Service Manual 4-23
5795591-100 English Rev. 3
4-3-16 Color Mode Checks
4-3-16-1 Introduction
Color Flow screens are 2D or M Mode screens with colors
representing blood or tissue movement.
Color Flow may be selected both from 2D mode or from M mode
or a combination of these.
4-3-16-2 Preparations
• Connect one of the probes to the scanner’s left-most probe
connector.
• Turn ON the scanner.
The 2D Mode window is displayed (default mode).
4-3-17 Select Color 2D Mode
1. From an optimized 2D image, press Color.
2. Use the trackball to position the ROI frame over the area to
be examined.
3. Press Select. The instruction Size should be highlighted in
the trackball status bar. Use the trackball to adjust the
dimension of the ROI.
To Next Page
Loading...
