Connectivity setup
Vivid T9/Vivid T8 – Basic Service Manual 3-63
5795591-100 English Rev. 3
3-9-6-1 Query/Retrieve Setup on Vivid T9/Vivid T8(continued)
4. Select DicomQR in the Selected column and then select
Properties to display the Properties dialog.
Figure 3-48. Select DicomQR Properties
5. Select the DICOM Query/Retrieve server from the
IP-address pull down menu. In some cases, the server is
the same as used for DICOM Storage.
If the server is missing from the list, select Modify from the
pull down menu and edit the setup for one of the predefined
servers.
Enter the correct AE Title and Port Number for the DICOM
Query/Retrieve server in the respective fields in the
DicomQR Properties screen.
Figure 3-49. Dicom QR Properties
To Next Page
Loading...
