Option Setup
Vivid T9/Vivid T8 – Basic Service Manual 3-75
5795591-100 English Rev. 3
3-10-1 Software Option Installation Procedure(continued)
4. In the pop-up screen, input the new key and select Save.
Figure 3-65. Dialog Window
NOTE: There is no need to restart the system after each
installation, if several option keys are installed at one time.
Select Cancel for the first several times, and select OK after
the last installation to activate all the changes.
5. After the system is powered on, check the option status.
The option status explanation:
• Permanent: This option is enabled in the system.
6. Exit and check the function of the option installed.
To Next Page
Loading...
