Common Diagnostics
Vivid T9/Vivid T8 – Basic Service Manual 7-45
5795591-100 English Rev. 3
7-5-2 Service Diagnostics(continued)
10. In the Diags-> Run Diags-> S_ProbeAssessment to
check the probe.
If there is no broken element and the probe is acceptable for
diagnostic, the following result window displays.
Figure 7-27. Probe Assessment Pass
11. In the Diags-> Run Diags->Diags History to check the
probe diagnostic results.
Figure 7-28. Probe Assessment Result
To Next Page
Loading...
