GE DRAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-59
5.) Pull 10 encoder key caps and 8 TGC control key caps out. Refer to the figure below.
6.) Disconnect A/N key cable and unscrew 10 screws of A/N key. Refer to the figures below.
Figure 8-76 Pulling 10 encoder key caps and 8 TGC control key caps out
Figure 8-77 Disconnecting A/N key cable and unscrew 10 screws
To Next Page
Loading...
