14 XL Vu™ VideoProbe
®
Safety Information
Battery Warnings
Only use the battery (XLGOABATTA or XLGOABATTB) and power
supply (XLGOACHGR or XLGOAAUTOC) specied for use with the XL
Vu system.
Before use, thoroughly review the instructions in this manual for the bat-
tery and battery charger to fully understand the information contained in
them, and observe the instructions during use.
WARNING
• Do not place the battery in re or exceed the battery operating
temperature.
• Do not pierce the battery with nails, strike the battery with a hammer,
step on the battery, or otherwise subject it to strong impacts or
shocks.
• Do not expose the battery to water or salt water, or allow the battery
to get wet.
• Do not disassemble or modify the battery.
Battery Communication Error: If the XL Vu shows this error
message on the display, please contact your nearest customer support
center.
Using the battery outside its recommended operating range will result
in degradation of the performance and service life. When storing the
battery, be sure to remove it from the base unit.
Recommended temperature range for Li-ion battery operation.
Discharge (when using the instrument): : -20˚ C to 46˚ C
Recharging : 0˚ C to 40˚ C
Storage : -25˚ C to +60˚ C
To Next Page
Loading...
