Gecko Aeware Swim spa solution User Manual

15
Swim Spa Solution™
power-up & breaker setting
Make sure all accessories
are linked to the bonding
connector and connected
to pack.
Turn on the breaker.
It's important to specify the
current rating of the GFCI used
to insure safe and effi cient
current management (and no
GFCI trippings).
Press and hold Prog. button
until you access the breaker
setting menu.
The values displayed by the
system correspond to 0.8 of
the maximum amperage
capacity of the GFCI.
GFCI Br
60 Amp 48 Amp
50 Amp 40 Amp
40 Amp 32 Amp
30 Amp 24 Amp
20 Amp 16 Amp
Use Up or Down button to
select the desired value.
Then press Prog. button to set
breaker rating.

Gecko Aeware Swim spa solution Specifications

General

Brand	Gecko
Model	Aeware Swim spa solution
Category	Control Systems
Language	English