27
Swim Spa Solution™ spa pack error codes summary
in.xe
TM
error codes
Hr: means the error comes from the MASTER pack.
Hr2: means the error comes from the SLAVE pack.
An internal hardware error has been detected in in.xe™.
HL: means the error comes from the MASTER pack.
HL2: means the error comes from the SLAVE pack.
Water temperature at the heater has reached 119°F.
Do not enter spa water!
Error codes indicate a failure
condition or a problem which
needs to be corrected to
ensure proper functioning of
the system. The error code
and the water temperature are
alternately displayed.
If there is more than one active
error, the one with highest
priority is displayed.
All error codes will be displayed
on the keypad display.
FLO: means the error comes from the MASTER pack.
FL2: means the error comes from the SLAVE pack.
The system did not detect any water fl ow while the main pump
was running.
OH: means the error comes from the MASTER pack.
OH2: means the error comes from the SLAVE pack.
Water temperature in the spa has reached 108°F.
Do not enter spa water!
To Next Page
Loading...
