Gecko Aeware Swim spa solution - OH or OH2 Error Condition Flow Chart

33
Swim Spa Solution™
Remove
spa cover
and let
system cool
down, until
the error
clears.
Replace
Spa Pack,
if problem
persist
Replace
Spa Pack,
if problem
persist
Measure water
temperature
with a DIGITAL
thermometer
Are you getting
correct tempe-
rature reading
on the keypad
display?
yes
no
Add cold
water and
lower filter
cycles.
Replace
heater, if
problem
persist
Flow chart
OH or OH2 error condition flow chart
Water temp. in the spa has reached 108°F (MASTER pack).
Water temp. in the spa has reached 108°F (SLAVE pack).
or