Geemarc CL555 - Dialling Mode Setting

23
Dialling Mode Setting
In the UK, all telephone exchanges now use Tone dialing. If your
telephone does not dial out, it is probably being used from an
older private switch- board (PBX). In this case, the Tone/Pulse
setting must be changed to Pulse.
Press ‘MENU’ soft key
Use  and  to select ‘SET PHONE’
Press ‘SELECT’ soft key
Use  and  to select ‘DIALLING MODE’
Press ‘SELECT’ soft key
Use  and  to select either‘TONE’ or ‘PULSE’
Press ‘SELECT’ soft key to confirm
8
SETTINGS