Geemarc CL555 - Recording an Outgoing Message; The Outgoing Message

49
Outgoing Message
Before you use the answering machine you should record an
outgoing message. The outgoing message is your message to an
incoming caller and may be up to 2 minutes in length.
The default OGM is “Please leave your message after the tone”.
If you prefer, you can record your own OGM.
Recording an Outgoing Message
Press ‘MENU’ soft key
Use  and  to select ‘TAM SETUP’
Press ‘SELECT’ soft key
Use  and  to select ‘OUTGOING MSG’
Press ‘SELECT’ soft key
Use  and  to select ‘RECORD OGM’
Press ‘SELECT’ soft key
‘RECORDING’will be displayed
On hearing the tone, record your personal OGM. When you
have finished speaking press the ‘END’ soft key. If you
speak for longer than 2 minutes, recording will stop
automatically. The new OGM will be played after recording
ANSWERING MACHINE