Geemarc CL555 - Caller ID Talking Setting

26
Caller ID Talking Setting
This feature allows you to check the Caller ID number on
receiving a new call without looking at the display i.e. the
telephone number is announced (provided the number has not
been blocked by the caller). If you have stored the incoming
telephone number in the phone book and recorded the
corresponding name, the name will be announced.
Press ‘MENU’ soft key
Use  and  to select ‘SET TALK’
Press ‘SELECT’ soft key
Use  and  to select ‘CID TALKING’
Use  and  to select either‘ON’ or ‘OFF’to
activate/deactivate the Caller ID talking function
Press ‘SELECT’ soft key to confirm
24
SETTINGS