26
SAFETY
Maintenance Precautions
Prepare the work area
¡Select a firm, level work area. Make sure
there is adequate light and, if indoors,
ventilation.
¡Clear obstacles and dangerous objects.
Eliminate slippery areas.
Always clean the machine
¡Clean the machine before performing
maintenance.
¡Stop the engine and cover electrical parts
when washing the machine. Water on
electrical parts could cause short-circuits
or malfunctions.
Do not use water or steam to wash the
battery, sensors, connectors or the
operator’s compartment.
Stop the engine before
performing maintenance
¡Avoid lubrication or mechanical
adjustments with the machine in motion
or with the engine running while stationary.
¡If maintenance must be performed with
the engine running, always work as a two-
person team with one person sitting in the
operator’s seat while the other works on
the machine.
• When performing maintenance, be sure
to keep your body and clothing away
from moving parts.
Stay clear of moving parts
¡Stay clear of all rotating and moving parts.
Wrapping or entanglement may result in
serious injury or death.
¡Keep hands, clothing and tools away from
the rotating fan and running fan belts.