31
SAFETY
Maintenance Precautions
Have a Gehl service agent repair
welding cracks or other damage
Ask a Gehl service agent to repair any
welding problems which are detected. If not
feasible, make sure the welding is done by a
qualified person in a properly equipped
workplace.
Checks after maintenance
¡Gradually raise the engine speed from a
low idle to maximum speed and check that
no oil or air is leaking from serviced parts.
¡Move the controls and check that the
machine is operating properly.
Safety signs
¡Keep all safety signs clean and legible.
¡Replace all missing, illegible or damaged
safety and warning signs.
Disposing of wastes
¡Funnel spent fluids from the machine into
containers. Disposing of fluids improperly
destroys the environment.
¡Follow the prescribed regulations when
disposing of oil, fuel, engine coolant,
refrigerant, solvents, filters, batteries or
other harmful substances.
To Next Page
Loading...
Need help?
General
