75
OPERATION
Braking when traveling down slopes
Braking is automatically applied by the
hydrostatic drive system when the left control
lever is returned to the neutral position. Full
braking is achieved when the safety bar is
raised.
If the engine stops
If the engine stops when traveling down a
slope, set the control levers and pedal to the
neutral position, stop the machine and re-
start the engine.
Do not open the front door (if equipped)
while traveling on slopes
Opening the front door while traveling on
slopes can be hazardous, because the force
required to open and close the door changes
abruptly. Always keep the door closed when
traveling on slopes.
Operating Procedures
T7D034
Braking
T7D036
T7D035E
Descending
To Next Page
Loading...
Need help?
General
