Gehl R220 User Manual

50950106/AP0313 121
INDEX
A
Accessory Plug . . . . . . . . . . . . . . . 23
Activating The Warming Circuit . . . 27
Adjusting Chain Tension . . . . . . . . 76
Adjustments. . . . . . . . . . . . . . . . . . 72
All-Tach® Hitch . . . . . . . . . . . . . . . 26
Air Conditioner
Operation . . . . . . . . . . . . . . . . 24
Alternator/Fan Belt . . . . . . . . . . . . 88
Attachment Mounting . . . . . . . . . . 26
Auxiliary Hydraulic Controls
High-Flow. . . . . . . . . . . . . . . . 43
Standard-Flow . . . . . . . . . . . . 43
B
Battery. . . . . . . . . . . . . . . . . . . . . . 94
Jump-starting . . . . . . . . . . . . . 50
Before Starting the Engine . . . . . . 47
Bucket Cutting Edge . . . . . . . . . . . 88
Bucket Selection . . . . . . . . . . . . . 117
Bucket Usage . . . . . . . . . . . . . . . . 53
Digging with a Bucket. . . . . . . 53
Driving on an Incline. . . . . . . . 53
Driving over Rough
Terrain . . . . . . . . . . . 53
Dumping into a
Truck (or Hopper) . . 54
Dumping onto a Pile. . . . . . . . 54
Dumping over
an Embankment. . . . 54
Leveling the Ground. . . . . . . . 55
Loading a Bucket . . . . . . . . . . 54
Scraping with a Bucket. . . . . . 55
C
Capacities and Ratings. . . . . . . . 114
Chaincases . . . . . . . . . . . . . . . . . . 75
Checking and Adding Oil . . . . 75
Draining Oil . . . . . . . . . . . . . . 75
Changing Attachments . . . . . . . . . 51
Connecting Attachments . . . . 51
Connecting Auxiliary
Hydraulic Couplings 52
Removing Attachments . . . . . 52
Changing Engine Oil and Filter. . . 80
Changing Fuel Filter . . . . . . . . . . . 81
Changing Hydraulic Oil . . . . . . . . . 88
Changing Hydraulic Oil Filter . . . . 87
Checking and Adding Oil . . . . . . . 75
Checking Coolant Level . . . . . . . . 89
Checking Engine Oil Level . . . . . . 80
Checking Hydraulic Oil Level . . . . 87
Checking the Water Separator . . . 81
Checking Tire Pressure . . . . . . . . 91
Cleaning the Cooling System . . . . 89
Cold-Starting. . . . . . . . . . . . . . . . . 48
Cold-Starting Procedure . . . . . . . . 48
Common Materials
and Densities . . . . . . . . . . . . . . . 116
Component Plate Locations . . . . . 17
Connecting Attachments. . . . . . . . 51
Control/Indicator Symbols. . . . . . 3, 4
CONTROLS . . . . . . . . . and SAFETY
EQUIPMENT 19
Cooling System. . . . . . . . . . . . . . . 89
Cleaning . . . . . . . . . . . . . . . . 89
Coupler Locations
High-Flow . . . . . . . . . . . . . . . 52
Standard-Flow . . . . . . . . . . . . 52

Gehl R220 Specifications

General

Engine Power	70.7 hp
Rated Operating Capacity	2, 200 lbs
Tipping Load	4, 400 lbs
Engine Make	Yanmar
Hydraulic Pressure	3, 335 psi