Alt+ to display template information
STEP 42
G0805206
G0905065
Remove the wood blocks (both sides) from between
the frame and the rear axle. Remove the wheel
chocks.
STEP 43
G0905078
Start the engine, apply the park brake. Move the
steer mode switch to the 4-wheel steering position.
Turn the steering wheel in one direction until the
wheels reach their travel limits, and then back the
other way to their travel limits. Repeat this procedure
several times until the air is removed from the circuit.
Shut off the engine. Check for leaks. Correct any
leakage found. Check fluid level; add fluid if needed.
STEP 44
G0905061
Install the front cover using the four bolts.
To Next Page
Loading...
