Gehl RS5-34 - Page 261

RS5-34 Telescopic Handler INNER BOOM
PRINTED IN U.S.A. 703-9 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
Rac
0
-
00000
Template Date: 1997_02_12
STEP 35
Remove the caps and plugs from the hydraulic
fittings.
STEP 36
G1005044
G0805216
Install the hose clamp (1) and reconnect the two
hydraulic hoses (2) to the tilt cylinder.
STEP 37
G1005089
G1005089
Reinstall the two side slide pads and shims (1) and
the two top slide pads and shims (2) to the rear of the
inner boom using the lock plates (3) and bolts (4).
Use Loctite
™ 271 (red) Thread Lock (or equivalent)
on the threads of the bolts and torque to 30 ft.-lbs.
(41 Nm). Bend up each end of the lock plates up.
1
2
2
1
2
2
1
3
3
4
4
4
4
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com