Gehl RS5-34 - Page 286

RS5-34 Telescopic Handler INTERMEDIATE BOOM
PRINTED IN U.S.A. 706-4 913241
Template
Name:
OML
_
2
_
col
907871
Template Date: 1994_04_22
Alt
=
to
hide
template
information
Alt+ to display template information
STEP 13
G1005060
G1005061
Loosen and remove the bolts (1) and lock plates (2),
and remove the two bottom slide pads from the front
of the outer boom.
STEP 14
Using the hoist and lifting strap, pull the intermediate
boom out of the outer boom approximately 108
inches (2.74 mm). Lower the hoist and measure from
the end of the intermediate boom section back 84
inches and make a mark using a dye marker.
STEP 15
G1005054
Position the hoist and lifting strap on the mark made
earlier. This will allow a balanced lifting point.
STEP 16
Remove the intermediate boom section from the
outer boom.
1
1
2
2
1
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com