Alt+ to display template information
STEP 59
G0705034
G0705035
Torque the two center bolts in the front engine
mounts to 285 to 320 lb.-ft. (385 to 435 Nm).
STEP 60
G0905178
Install the muffler bracket (1) to the right side of the
engine using the two bolts (2).
STEP 61
G0905179
G0905168
Remove the lifting bracket or ring from the head.
Remove the lifting device and the hoist.
G0705071
NOTE:
The flywheel must be rotated to install the
flywheel-to-flexplate bolts. Rotate the flywheel by
inserting a pry bar through the inspection hole in the
bottom of the housing bell and into the ring gear.
1
2
2
To Next Page
Loading...
