13. Operating Instructions
2-79
5) Clean the bucket boss section and install the O-ring.
IMPORTANT
• Check that the O-ring is not damaged. If it is dam-
aged, replace it.
• We recommend that you replace the O-ring when
you replace the bucket.
6) Connect the arm to hole (A), and then connect the link
to hole (B).
7) Install the O-ring in position.
IMPORTANT
Before mounting the bucket, clean the arm pin hole
and grease it.
8) Install the bolt into the bucket pins A and B.
9) Grease the connecting parts.
O-ring
Bucket
000446-00E
Bolt
Bucket pin
Nut
000447-00E
To Next Page
Loading...
