13. Operating Instructions
2-39
13-4-1. Traveling forward
1) Pull the accelerator lever (1) back to the "RUN" position
to increase the engine speed.
2) Unlock the lock levers (2), and retract the implement to
lift it 16 to 20 in. (40 to 50 cm) above the ground.
13-4. Traveling
• Always check the position of the blade before
operating the travel levers and pedals.
When the blade is in the rear, the travel levers
and pedals operate in the reverse of the normal
operation.
• A signal person should be in attendance to give
signals at sites which are dangerous or not clear-
ly in view of the operator.
• Clear all people from the working area.
• Sound the horn before beginning travel, to alert
the people near the machine.
• Clear obstacles from the path of the machine.
• Do not operate the travel levers and pedals rap-
idly while the engine is running at high speed.
Otherwise, the machine may move unexpectedly,
causing a serious accident.
015564-00X
(2)
(1)
(5)
(4)
(2)
(3)
Idling
Run
(1)
009044-00E
Unlock
(2)
(Left side)
009133-00E
To Next Page
Loading...
Need help?
General
