5-2
27. General Precautions
The mounting of unauthorized attachments and optional parts may cause accidents as well as shorten
the machine life.
If you need to mount any attachments other than those described in this manual, contact your dealer. If
you fail to do so, the installation and use of unauthorized attachments and parts may void your Warranty.
Precautions for mounting and dismounting an attachment
When mounting or dismounting an attachment, observe the following precautions for safety.
• When mounting or dismounting a heavy implement or attachment, place the machine on
level, solid ground.
• When you work together with a partner, define hand signals and communicate in accor-
dance with those signals.
• When moving a heavy load [more than 55.1 lbs. (25 kg)], use a crane.
• When removing a heavy part, be sure to support it adequately.
When lifting such a part with a crane, be aware of its center of gravity.
• Do not mount or dismount a heavy part while suspending it with a crane. Be sure to support
it securely on a stable base.
• Securely support any attachment that has been removed or is to be installed, and take ad-
equate precautions not to let it fall down.
• Never stand directly under a load suspended by a crane.
Stand far enough away to be safe if the load should fall.
IMPORTANT
Comply with all licensing requirements before operating a crane.
Do not permit an unauthorized person to operate a crane.
For more information about the procedures for mounting and dismounting attachments, ask
your dealer.
27-1. Safety precautions
To Next Page
Loading...
Need help?
General
