24. Maintenance Table
3-22
Note :
1) When machine is used at dusty worksites clean and replace filter element twice or more frequently
than specified in the table.
2) Execution of periodic inspection and servicing is indispensable to conform the EPA emission control
regulations.
Keep a record of the results.
: Check : Supply : Replace : Adjust (clean) : Oil & grease
Check & service items Daily Every
50
Every
100
Every
250
Every
500
Every
1000
Every
2000 hrs
Fuel oil Check & supply of oil to the tank
Drain the fuel tank
Clean the oil/water separator
Replace the fuel filter element
Lube oil Check the quantity of engine oil
Replace the engine oil
1st time
Replace the engine oil filter element
1st time
Cooling water Check & supply of cooling water
Clean radiator fins
Check the fan-belt tension
()
Replace the cooling water
Clean & check the cooling water system within
two year
Rubber hose Check & replace fuel oil pipe,
cooling water pipe
Operation
system
Check & adjust governor lever, accelerator
Intake system Clean air cleaner & replace element
*Check turbocharger, adjust
Cylinder
head
Adjust the intake and exhaust
valve clearance
Lapping the intake and exhaust valve
Retightening the cylinder head bolts
Fuel pump &
injection valve
Check fuel valve nozzle, clean
Check & adjustment of fuel injection
pressure & atomizing condition
Check fuel pump, adjust
*Applicable to models with the relevant equipment
To Next Page
Loading...
