25. Procedures for Maintenance
3-58
25-7-3. Replacing the air cleaner element
1) Open the engine hood rear cover.
2) Remove the clip (1) to remove the dust cup (2).
3) Remove the element (3).
Cover the connector side in the back of the air cleaner
body with a clean cloth and tape to prevent dirt from en-
tering.
4) Clean the dust cup (2) and the inside of the body.
Remove the clean cloth and the tape used to cover the
connector in the back side of the body.
5) Install a new element (3).
6) Install the dust cup (2), while checking the arrow on it.
7) Close the engine hood rear cover.
Never attempt to replace the air cleaner element
while the engine is running.
Replace the air cleaner element after the engine
has been stopped and cooled sufficiently.
(1)
(2)
015606-00X
015607-00X
(3)
To Next Page
Loading...
