13. Operating Instructions
2-50
Do not bump the blade against a large rock or boulder
Do not bump the blade against a large rock or boulder. Do-
ing so may cause the blade or the hydraulic cylinder to be
damaged.
Be careful when retracting the implement
When retracting the implement for travel or transport, be
careful that the bucket and the blade never bump against
each other.
Support the blade on both sides
When you use the blade as an outrigger, support the blade
on both sides.
Be careful not to bump the blade when excavating
When excavating the ground with the blade in front, never
let the blade bump against the boom cylinder.
Place the blade in rear, if it is not being used.
000426-00X
000427-00X
000428-00X
000429-00X
To Next Page
Loading...
