13. Operating Instructions
2-53
Braking when going down a slope
When going down a slope, you can automatically brake the
machine by setting the travel levers to the neutral position.
When the tracks are slipping
If you cannot climb a slope by operating the travel levers
because the tracks are slipping, retract the arm and make
use of the pull-back power of the implement to climb the
slope.
When the engine stops
If the engine stops while climbing a slope, set the travel le-
vers to the neutral position, stop the machine, and restart
the engine.
Precautions for traveling on a slope.
Do not open or close the cabin side door on a slope.
Doing this may cause the door to swing open or closed
very rapidly.
Be sure to lock the cabin side door in either the open or
closed position.
To Next Page
Loading...
