17 / 32
1434 µPos
Contents
1 Notes for your safety 17
1.1 General information 17
1.2 Safety notes 18
1.3 Correct use 18
1.4 Information on use in damp
conditions 19
1.4.1 Converting to protection
class IP 67 19
1.5 Installation position 20
1.6 Tools required for installation and
assembly 20
1.7 Service and maintenance 20
2 Manufacturer’s information 20
2.1 Delivery 20
2.2 Function 20
3 Mechanical mounting 21
3.1 Assembling the travel sensor 21
3.2 Mounting the positioner 22
3.3 Mounting the external travel
sensor (only for version with
remote mounting) 23
3.4 Mounting the positioner using a
mounting bracket 23
4 Pneumatic connections 24
5 Electrical connections 24
6 Initialisation and
commissioning 24
6.1 Electrical and pneumatic
connection 25
6.2 Automatic initialisation 25
6.3 Commissioning 25
7 Display elements 26
8 Error messages 27
9 Disposal 27
10 Returns 27
11 Information 27
12 Dimensions 28
13 Technical data 29
14 Order data 30
15 EU Declaration of Conformity 31
1 Notes for your safety
Please read the following notes carefully and
observe them!
1.1 General information
Important requirements to ensure that our
GEMÜ 1434 μPos works correctly:
• Correct transport and storage
• Installation and commissioning by trained
personnel
• Operation according to these installation,
operating and maintenance instructions
• Recommended maintenance
All rights including copyright
and industrial property rights are
expressly reserved.
The GEMÜ 1434 μPos must be used
in accordance with these directions.
All information in these installation,
operating and maintenance instructions
regarding operation, servicing and
maintenance must be observed and
applied. If the information is not
observed, the operator’s guarantee
rights and the manufacturer’s legal
liability cease.
The manufacturer shall assume no
responsibility for the GEMÜ 1434 μPos
if this safety information is not observed.
Therefore, you must observe:
• the contents of these installation, operating
and maintenance instructions
• the relevant safety regulations for the
installation and operation of electrical
systems
• that this device must not be used in
potentially explosive areas.
The regulations, standards and guidelines
named in these installation, operating and
maintenance instructions are only applicable
in Germany. If the GEMÜ 1434 μPos is
used in other countries, the local applicable
regulations must be observed. When
dealing with harmonised European norms,
standards and guidelines, these apply within
the Single European Market. The operator
must also adhere to national rules and
guidelines, if applicable.
The descriptions and instructions in these
To Next Page
Loading...
Need help?
General
