Pag.25
the maximum air gap has been reached.
The brake wear has to be checked with the brake closed, therefore:
Make sure that all moving parts have stopped, secure them mechanically if required!
Make sure that the elevator can not be moved from any other person than the one who does the
check!
8.2
Inspection intervals
During installation or
after the first 3 months
every year
Distance of the rope guard x x
Check vibration isolation
The thickness of the vibration isolation must be the
same on the right and left.
x
x
Checking the air gap of the brake x x
Visual inspection of the mounting screws on the hous-
ing, brakes and traction sheave.
The locking compound must be free of damage.
x
x
Check the traction sheave if worn out
x
8.2.1
Checking the air gap
Follow the relevant instructions in “Installation Manual for EVO Brakes”
To Next Page
Loading...