○○○○○○○○○○○○○○○○○○○○○○
3•10 Reference Guide
LOAD SINGLE SOUND PROCEDURE (EX-
AMPLE)
Use the Demo Disk 01 supplied with the instru-
ment to load a Sample to memory. For this pro-
cedure, your instrument requires additional Sam-
ple RAM. If your SK760/880 does not have ad-
ditional S-RAM, use any SK760/880 Sounds disk
containing edited sounds, or have your instrument
upgraded with optional S-RAM.
1. Insert the supplied Demo Disk 01 in the disk
drive and press DISK.
2. Select SINGLE SOUND from the Load page then
press ENTER to gain access to the File Selector.
The floppy disk directory may show the pres-
ence of several blocks, one containing the
Sample, another User Styles, etc.. The in-
strument’s RAM directory shows the ROM
sounds of the first Group (Piano).
3. Select (if necessary) the Sample Block and press
ENTER to gain access.
In this example, the disk directory shows the
presence of one Percussive Sample
(GRV.bpm 106 ) with Pr. Change and Bank
Select number 114-6.
4. Select (if necessary) the Sample and its corre-
sponding destination in RAM (114-6).
Use the buttons to scroll the Sound
Groups (1, 2, … 15, 16). In this case, scroll
to Group 15 (Percussive - example A).
Use the directional / arrows to scroll to
the desired Bank (in this case, bank 6) and
destination (Program Change 114 - exam-
ple B).
5. Press ENTER twice to load the Sample file to
memory.
○○○○○○○○○○○○○○○○○○○○
©
Note: It is recommended to load Sounds and
Samples to their original locations to facilitate the
on-board file search facilities, but you are free to
○○○○○○○○○○○○○○○○○○○○
load them to any Group.
4
A
B
1/2
3
ENTER
TE
To Next Page
Loading...
Need help?
General
