○○○○○○○○○○○○○○○○○○○○○○
vi Introduction
RAM RESET
If you want to recall the factory settings, you can
reset the backed RAM.
1. Press GENERAL in the EDIT section to enter
the “Edit General” menu.
2. Press the soft button F4 to select the “Restore
all” command. The following dialogue window
is displayed.
3. Press ENTER to confirm the initialization, or
ESCAPE to cancel the procedure. If the pro-
cedure is confirmed, the instrument can be
played after few seconds.
Battery discharged message
If the instrument has been left turned off for a
long period of time, the battery will slowly dis-
charge.
When the battery discharges completely, it caus-
es the total loss of all user programmed data.
If the battery has lost its charge completely, turn-
ing the instrument on will show the following
message:
The message cancels automatically after 2/3
seconds.
After the message cancels, be sure to save all of
your edited work to disk until after the battery has
sufficiently charged.
Leave the instrument on for a few hours to re-
charge the battery. One hour of charge time cor-
responds to approximately one day of use - the
battery charge remains active for approximately
15 days of non-use.
If you foresee leaving the instrument turned off
for a long period of time, be sure to save all user-
programmed data to disk to safeguard your data
against automatic erasure due to battery dis-
charge.
To Next Page
Loading...
Need help?
General
