GEM WK8 User Manual

○○○○○○○○○○○○○○○○○○○○○○
17•10 Reference Guide
RESTORE ALL (F3)
This operation cancels all user programmed data
currently in RAM (Performances, User Styles,
Style-Performances, Songs) and restores the in-
strument to its factory-set status (RAM empty).
Pressing F3 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLES (F4)
This operation cancels all User Styles in RAM
(including User Style-Performances) residing in
the User 1, 2, 3 and 4 buttons of the STYLE
GROUPS. The User slots are restored to the
factory-set conditions (empty: “User”).
Pressing F4 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE PERFORMANCE (F5)
This operation cancels all user-programmed Per-
formances in RAM residing in the 8 buttons of
the PERFORMANCE GROUPS. The status of
the Performance parameters are restored to the
factory-set values.
Pressing F5 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SONGS (F6)
This operation cancels all Song in RAM. The
Songs memory is restored to the factory-set sta-
tus (empty: “User”).
Pressing F6 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLE-PERFORMANCE (F7)
This operation cancels all user-programmed
Style-Performances associated to the ROM
STYLES. The status of the Style-Performance
parameters are restored to the factory-set val-
ues. ROM Styles associated to modified Style-
Performances are identified by an asterisk (*) after
the Style name.
Pressing F7 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SOUNDS (F8)
This operation restores the Sound configuration
to the original factory-set situation, cancelling all
User edited Sounds previously stored to user lo-
cations. This operation is particularly useful to
restore the original SK760/880 sound set (over
1,000 sunds) after loading a sound configuration
from a previous WK4 disk (about 600 sounds)
using the Load All Sounds or Load Block proce-
dures.
Pressing F8 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.

GEM WK8 Specifications

General

MIDI	In, Out, Thru
Storage	Floppy disk drive
ROM	8 MB
Display	LCD
Effects	Reverb, Chorus
Outputs	Headphones
Inputs	Sustain pedal
Polyphony	32 voices