上海鲍麦克斯电子科技有限公司 AS系列数控交流伺服系统说明书
1
1. Installation Introduction
1.1Product specifications
Product Type AHE5A Supply Voltage AC 220 ± 44 V
Power frequency 50Hz/60Hz Maximum output power 550W
1.2 Interface connection
Connecting the plugs of pedaland machine head to the corresponding sockets at the back
of controller, as Figure 1-2. Please check and confirm the plug is inserted firmly.
· Please read this manual carefully, also with related manual for the
machinery before use the controller.
· For installing and operating the controller properly and safely,
qualified engineers are required.
· Please stay away from arc welding equipment, in order to avoid
electromagnetic interference and malfunction of the controller.
· Keep room temperature bellow 45°c and above 0°c
· Do not use in humidity below 30% or above 95% or dew and mist
places.
· Please turn off the power and unplug the power cord, before install the
control box and other components,
· To prevent interference or electric leakage accidents, please make the
ground work; the power cord ground wire must be securely connected
to earth by an effective way.
· All parts for the repair provided by the Company or approved before
use.
· Please turn off the power and unplug the power cord before any
maintenance action. There is dangerous high voltage control box, you
must turn the power off after one minute before opening the control
box.
· The symbol
in this manual means Safety Precautions, please pay
attention to it and strictly follow it, to avoid any unnecessary damage.
Safety Instruction
To Next Page
Loading...
