上海鲍麦克斯电子科技有限公司 AS系列数控交流伺服系统说明书
14
4、an be used as the parameter's value through the pedal real-time monitoring of 025
parameters at different positions of the monitoring mode sampling numerical.
Adjusting the corresponding parameters, presser foot and step on or after step action
position change. As on the great distance machine is not running, may be appropriate
to reduce the 137 parameters (not less than to the location parameters in 136), can
improve the sensitivity of feet; if the machine is too sensitive, touch the pedal
machines began to work, it may be appropriate to increase the 137 parameters; if it is
not easy to fill needle, a little feet, speed quickly improve the cause forward multi
needle, may be appropriate to increase or decrease the 138 parameters of 137
parameters (i.e. adding feet pedal speed range), can also be appropriate to reduce
the initial seam speed (100).
Fig. 4-1 pedal movement of each position parameter
386P0271B
2016-04-29
To Next Page
Loading...
